KWVR Route.

View previous topic View next topic Go down

KWVR Route.

Post  abclare on Tue 29 Jan 2013, 12:21 pm

Hi All.
These 3 Acts wont run and this is the fault messages that i get can anyone help please????

(1) Sheffield to Carlisle Coal

KWVR- MK1BCK unid 200067 placement at start point of path BH-SBC Failed

(2) Sheffield to Blackburn Coal

Failed to initialize Car 200062 Rigid Body


(3) Sheffield to Carlisle Empties

KWVR MK1 TSO 20006 Replacement at point of Path BH SCAE Failed

Thank You.
Art.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  bharrison on Tue 29 Jan 2013, 12:42 pm


I was approached by Art myself about these but I was unable to find the cause if anyone can help him please can you.



Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

KWVR Route.

Post  abclare on Tue 29 Jan 2013, 2:16 pm

Thank you Ben.


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  mikehendle on Tue 29 Jan 2013, 8:45 pm

Hi Art
1) You need the MK1 Patch,
2) You need to open AE and find which one is in conntact with a buffer
3) Haven't a clue best to ask the activity creator,if you down loaded the activity from the libarary

Mike


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

Re: KWVR Route.

Post  bharrison on Tue 29 Jan 2013, 9:16 pm


Mike,

I made them for him But I've looked through the acts with a fine tooth comb and can't seem to see anything sticking out of line will look again tomorrow night.



Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

KWVR

Post  abclare on Tue 29 Jan 2013, 10:51 pm

Hi Mike.
No i got the CD direct from KWVR what now????


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  j3801 on Wed 30 Jan 2013, 12:30 pm

Ben,

Sometimes the A.E. shows everything is fine when it isn't.
You may have to move the consists from the siding, re-save the activity, then re-start the A.E. and put the consist back. I have had this with some of the activities that I have been trying to make myself recently.
Sometimes A.E. moves them when your not watching it.

I hope this helps.

Justin


avatar
j3801
Admin

Posts : 478
Join date : 2013-01-17
Age : 32
Location : Kirrawee, Sydney, Australia

http://tsforum.freeclanforum.com

Back to top Go down

Re: KWVR Route.

Post  mikehendle on Wed 30 Jan 2013, 12:55 pm

Hi Art,
for the 2 coaches that start with KWVR MK1 check that they are in your trainset folder as they are part of the stock that was on the CD.
If you are using train store then run un store before looking in your MSTS trainset folder,the other error message usually means that item is in collision with some thing,I'm afraid that is trial and error in AE to find it.


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

Re: KWVR Route.

Post  gswindale on Wed 30 Jan 2013, 1:24 pm

Hi Ben,

Where are these activities starting? Is it directly at the end of the line? Try moving the starting points for the paths slightly away from the end nodes if that is the case.


Truth is rarely pure, and never simple.
avatar
gswindale

Posts : 168
Join date : 2013-01-17
Age : 38

http://www.makingtracks-online.co.uk

Back to top Go down

KWVR

Post  abclare on Wed 30 Jan 2013, 2:19 pm

Thank you all.

These things you are asking me to do are to much for me i have never used AE before and would not know where start. Would it do any good deleting these Acts completely and re-installing them again???


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  gswindale on Wed 30 Jan 2013, 6:07 pm

Hi Art,

I would do nothing until Ben has taken a further look at the activities.

I would offer to give them a quick look over myself but I do not have the route in question.



Truth is rarely pure, and never simple.
avatar
gswindale

Posts : 168
Join date : 2013-01-17
Age : 38

http://www.makingtracks-online.co.uk

Back to top Go down

KWVR

Post  abclare on Wed 30 Jan 2013, 7:29 pm

Hi Geoff.

Thank you, yes you are correct i will wait as i did not know that Ben was having another look at it every one is so helpful makes me feel a bad. Embarassed Embarassed


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  bharrison on Wed 30 Jan 2013, 9:55 pm

abclare wrote:Hi All.
These 3 Acts wont run and this is the fault messages that i get can anyone help please????

(1) Sheffield to Carlisle Coal

KWVR- MK1BCK unid 200067 placement at start point of path BH-SBC Failed

(2) Sheffield to Blackburn Coal

Failed to initialize Car 200062 Rigid Body


(3) Sheffield to Carlisle Empties

KWVR MK1 TSO 20006 Replacement at point of Path BH SCAE Failed

Thank You.
Art.

Art.

Think I've fixed 2 of 3. Are you using the acts with the word Default at the end which I emailed you. But I'll do more investigating this week

We are here to help.


Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

KWVR

Post  abclare on Wed 30 Jan 2013, 10:37 pm

Ben.

Yes mate you are correct all 3 are marked as Default, sounds as if you are nearly there. Hope so!!!!


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  bharrison on Thu 31 Jan 2013, 9:31 pm


I've Not been able to find the fault on sheffield to blackburn coal thats stated by Art. I'll drop it to my act tester in the morning and see if he get's any flag ups. But the other two seem to be ok. Will get them checked aswell.



Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

KWVR

Post  abclare on Fri 01 Feb 2013, 10:38 am

mikehendle wrote:Hi Art,
for the 2 coaches that start with KWVR MK1 check that they are in your trainset folder as they are part of the stock that was on the CD.
If you are using train store then run un store before looking in your MSTS trainset folder,the other error message usually means that item is in collision with some thing,I'm afraid that is trial and error in AE to find it.

Hi Mike.
Done that and yes they are in Trainset Folder.


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

KWVR

Post  abclare on Fri 01 Feb 2013, 10:43 am

bharrison wrote:
I've Not been able to find the fault on sheffield to blackburn coal thats stated by Art. I'll drop it to my act tester in the morning and see if he get's any flag ups. But the other two seem to be ok. Will get them checked aswell.


Thank you Ben you are so helpful i hope that you get there on the end!!!!


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  gswindale on Fri 01 Feb 2013, 12:53 pm

Hi Ben,

That particular error message certainly sounds to me like a static consist placed too close to the buffers.
Are there any static consists in the activity? If so; try dragging them awy from any end points a little.


Truth is rarely pure, and never simple.
avatar
gswindale

Posts : 168
Join date : 2013-01-17
Age : 38

http://www.makingtracks-online.co.uk

Back to top Go down

Re: KWVR Route.

Post  bharrison on Fri 01 Feb 2013, 1:46 pm


It's with my act tester now will see what happens next.



Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

Re: KWVR Route.

Post  bharrison on Fri 01 Feb 2013, 9:22 pm


I'll post an update when I have the results.



Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

Re: KWVR Route.

Post  bharrison on Sat 02 Feb 2013, 4:37 pm


Art,

Good news my act tester has declared the Sheffield to blackburn coal as fine. Will sent you the new version asap and will have the other two checked aswell.


Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

KWVR

Post  abclare on Sat 02 Feb 2013, 9:52 pm

Ben.

Good news what next i am a bit lost now. Rolling Eyes Rolling Eyes


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  bharrison on Sat 02 Feb 2013, 9:55 pm


Art,

I'll send you a new copy of Sheffield to Blackburn coal.

I'll send the other two act's to be tested that you listed.





Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

KWVR Route.

Post  abclare on Sun 03 Feb 2013, 10:39 am

Ben.

Should i delete the ones that dont run or will the new ones just overwright them????


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  bharrison on Sun 03 Feb 2013, 1:20 pm


Art,

the new ones should overwrite them. I'll send them one at a time after they're tested.



Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

Re: KWVR Route.

Post  abclare on Sun 03 Feb 2013, 2:37 pm

bharrison wrote:
Art,

the new ones should overwrite them. I'll send them one at a time after they're tested.

Thamk you mate hope that they run this time after all you have done. Embarassed Embarassed


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

KWVR Route.

Post  abclare on Mon 04 Feb 2013, 3:27 pm

Hi All.

Sheffield to Blackburn Coal now running thanks to Bens fix. Laughing Laughing

Art.


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  bharrison on Mon 04 Feb 2013, 9:14 pm


Art,

Thats great to hear. The 3rd act won't be back til thursday at the latest.



Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

Re: KWVR Route.

Post  gswindale on Mon 04 Feb 2013, 9:41 pm

Purely out of interest Ben, what was the solution?


Truth is rarely pure, and never simple.
avatar
gswindale

Posts : 168
Join date : 2013-01-17
Age : 38

http://www.makingtracks-online.co.uk

Back to top Go down

Re: KWVR Route.

Post  bharrison on Tue 05 Feb 2013, 11:16 am


Geoff,

Rogue static rake I think.



Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

Re: KWVR Route.

Post  bharrison on Thu 07 Feb 2013, 4:14 pm


Art,

Has the last act now. Let's see if it runs ok.


Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

Re: KWVR Route.

Post  abclare on Thu 07 Feb 2013, 7:28 pm

KVWR wrote:Ben.

Your link wont let me C/P like the other two did?????

Art.


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  bharrison on Thu 07 Feb 2013, 9:20 pm


Art,

The file is a zip file same as the rest you have to download it from the email.

Should be a simple click away but I use windows 7 not Xp so not sure on how to download files of emails.

Anyone using Xp who can help art here.


Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

Re: KWVR Route.

Post  ianmacmillan on Fri 08 Feb 2013, 12:21 am

Best is to use a file transfer site. You upload to the site and give them the email of the person you want to send it to.
They send an email to the person giving the URL of a site to download from.

I use yousendit.
I have also used http://www.sendthisfile.com/.
There are plenty of others.
You have to sign up but there is a free option.

Easiest way is to send it to yourself and PM the URL to the person who wants it.

Here's an example....

yousendit.com UW15ak85dENWRDgxZXNUQw

It's a brakevan fitted with roller bearings to run at 75MPH for use on the Condor.

ianmacmillan

Posts : 172
Join date : 2013-01-18

Back to top Go down

Re: KWVR Route.

Post  dforrest on Fri 08 Feb 2013, 11:45 am

I am still trying to get the latest version of this route from somewhere.

David
avatar
dforrest

Posts : 423
Join date : 2013-01-21
Age : 72
Location : St. Vincent and the Grenadines (and in an earlier life, Hull)

Back to top Go down

Re: KWVR Route.

Post  mikehendle on Fri 08 Feb 2013, 11:57 am

Hi David
It is only available from the KWVR shop,unless you can get a used version from either Amazon or Ebay.
Mike


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

KWVR.

Post  abclare on Fri 08 Feb 2013, 11:58 am

bharrison wrote:
Art,

The file is a zip file same as the rest you have to download it from the email.

Should be a simple click away but I use windows 7 not Xp so not sure on how to download files of emails.

Anyone using Xp who can help art here.

Ben.
All done now all 3 Activities are running now (so far bounce ) thank you for all your help. Laughing


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  bharrison on Fri 08 Feb 2013, 1:03 pm


Art,

Your more than welcome those acts are unique in the weights are set to each loco.


Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

Acts

Post  abclare on Fri 08 Feb 2013, 3:35 pm

bharrison wrote:
Art,

Your more than welcome those acts are unique in the weights are set to each loco.


Ben
I have repied to your e-mail you said there are 5 Acts but i have 3????


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  dforrest on Fri 08 Feb 2013, 11:17 pm

mikehendle wrote:Hi David
It is only available from the KWVR shop,unless you can get a used version from either Amazon or Ebay.
Mike

I did this several weeks ago and they said they would get back to me but haven't.

David
avatar
dforrest

Posts : 423
Join date : 2013-01-21
Age : 72
Location : St. Vincent and the Grenadines (and in an earlier life, Hull)

Back to top Go down

KWVR Route.

Post  abclare on Mon 11 Feb 2013, 10:00 am

Hi All.

What is the correct procedure to install an Activites into the Route please??

Art.


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  mikehendle on Mon 11 Feb 2013, 11:12 am

Hi Art
If it's a APK file just double click it,and it will automatically load to your route,make sure you unstore trainstore first,other wise you will get error message
Some times they come with two folders in stead of a APK one will be called Routes and 1 called Trains,just past them into your trainsimulator folder.


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

KWVR

Post  abclare on Mon 11 Feb 2013, 11:22 am

Thanks Mike.


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

KWVR.

Post  abclare on Tue 12 Feb 2013, 7:29 pm

All my troubled Acts are now up and running thanks to you all who helped me especially Ben. Laughing Laughing


Art. An older one.
avatar
abclare

Posts : 286
Join date : 2013-01-28
Location : Suffolk

http://stp.co.uk

Back to top Go down

Re: KWVR Route.

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum