Andy's Workshop

Page 2 of 10 Previous  1, 2, 3, 4, 5, 6, 7, 8, 9, 10  Next

View previous topic View next topic Go down

Re: Andy's Workshop

Post  dee4141 on Fri 31 May 2013, 1:00 pm

I have a super pic of a 12 car rake racing through Paddock Wood just before the end of South East steam services (June 1961) - it was a Charing Cross to Ramsgate service via Dover, and 1017 was leading. Another South East pic taken in May 1961 shows 1011 on a Hastings to Charing Cross service with an 8 car rake. Either of the these would do nicely please. Take your time Andy... Wink
avatar
dee4141

Posts : 289
Join date : 2013-01-20
Location : Scotland

Back to top Go down

Re: Andy's Workshop

Post  rufuskins on Fri 31 May 2013, 6:51 pm

mikehendle wrote:Hi Andy,
Could you do 1035 in either Blue\Grey for me please?

I have found another Hastings set they are 2 car units consisting of a Motor Brake Second and a Trailer 2nd L. Unit Numbers 1119-22.

They were in service in 1961,I have a Photo of 1121 at Hamstreet and Orlestone,it would be something different.

Mike

Mmm ...... please remember that 1001 is a short wheel base 6S set, whilst 1035 was a long wheel base buffet 6B set - some 6'6" longer! 1119 to 1122 were 2 car sets(2H) and were not slab sided!

Alec


ALEC - Supporter of MSTS and TSSH!

rufuskins

Posts : 3350
Join date : 2013-01-17
Age : 68
Location : Milnrow, Lancashire

Back to top Go down

Re: Andy's Workshop

Post  mikehendle on Fri 31 May 2013, 7:09 pm

Hi Alec
I thought 2H were Hampshire Sets,but my book said they were Hastings sets,Andy I will leave it to choose a number for the Blue\Grey unit.

To tell the truth I lost interest in railways after steam finished on the Southern Region,as I was working for a airline by then.

I became more interested in aircraft until I worked for SAR in the 70's, steam was well used by them.

Mike


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Fri 31 May 2013, 7:37 pm

Hi all,
Thanks for all the replies. I have done a Blue/Grey Motor Coach today as a taster. Hope everyone thinks this is ok?
Enjoy! As for the Numbering No.1035 shows a 4 Window Motor coach. So should be okay to use?
Thanks
Andy



The green Unit has had a few additions put on as well;





Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Fri 31 May 2013, 11:28 pm

Hi all,
With no photos out there of DEMU Buffet Cars and only of Power Cars and TSO's I have found one that is still in existence in form of what was a DEMU Buffet car.
Does anyone have any photos please from both sides?
Anyway I enclose a shot I have rigged up into a BMP format file that should hopefully be correct?
Thanks
Andy



Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  mikehendle on Sat 01 Jun 2013, 1:43 pm

Hi Andy,
If you did 1031 in Blue\Grey instead of 1035,there is no need to have a buffet car, the buffet car was removed from the set in 1963. the buffet car was replaced by a TFK down graded to a TSK.
Mike


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Sat 01 Jun 2013, 5:54 pm

Hi Mike,
I want to supply a Buffet Car to give anyone who downloads this unit later on the option of adding this into their consist.
Trying to cover as much as I possibly can.
Thanks
Andy


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  mikehendle on Sat 01 Jun 2013, 8:25 pm

Hi Andy
I tried a google search turned up some sites plenty of class 203 but know clear photo of the buffet car,there was 1 shot by a specialist model manufacturer that showed one side of it,the serving side.

Mike


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Sat 01 Jun 2013, 8:46 pm

HI Mike,
Thank the lord for 'Face-ache' and having joined the 'Thumper Group' last night. Have been pointed in the direction of this? So it would appear my .BMP file isn't far off?
Here are the links for anyone interested?
http://www.flickr.com/photos/tonys-trainz/8914471170/in/photostream/
And this one;
http://www.flickr.com/photos/tonys-trainz/8914472766/in/photostream/



Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  mikehendle on Sun 02 Jun 2013, 10:55 am

Hi Andy,
They are really good photo's and nice and clear.

Have you tried this site http://www.semgonline.com/ it has every thing for any one interested in the Southern.

I'm looking forward to the time I can run your Hastings DEMU's

Mike


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Sun 02 Jun 2013, 6:54 pm

Hi Mike,
Glad to hear you are looking forward to running my DEMU's. So am I. I have an idea for an Activity or 2 once I have finished these.
I have seen that link many times, just nothing that has helped me out so far.
I have done the Texture files for the Buffet car. Here they are;



Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Tue 11 Jun 2013, 10:41 pm

Hi all,
Not a great deal of activity to report. I've been concentrating and being a pain to poor Justin. Trying to be too much of a perfectionist I think. Neutral Very Happy
Firstly, does anyone have any drawing or photos of a Hastings DEMU Buffet car Interior please? I believe I have the shape and windows etc showing correctly now as in the next shot;



I've done some work on the Green and the Blue & Grey Power Cars also as well as the TSOL Coach;











Enjoy! Very Happy

Thanks

Andy


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re:Hastings DEMU

Post  andrew moody on Wed 12 Jun 2013, 10:54 pm

35005CP wrote:Hi all,
Not a great deal of activity to report. I've been concentrating and being a pain to poor Justin. Trying to be too much of a perfectionist I think.  Neutral   Very Happy
Firstly, does anyone have any drawing or photos of a Hastings DEMU Buffet car Interior please? I believe I have the shape and windows etc showing correctly now as in the next shot;



I've done some work on the Green and the Blue & Grey Power Cars also as well as the TSOL Coach;











Enjoy!  Very Happy

Thanks

Andy
Hi Andy.
I have without any sucsess been trying to use the PM facility to try and contact you, Re Pictures of the interiors of your Hastings Demus.
but have been frozen out every time,Perhaps I am doing something wrong.
Anyway, I have scanned a couple of pics of the interiors of the coaches including one of the buffet area.
Perhaps yoy can PM me with your em address and I will send them back attached.
Cheers
Andy


Andy Moody (AKA AJ52MDY on the UKTS site) West Moors, Dorset on the "Old Road" closed September 1964

andrew moody

Posts : 376
Join date : 2013-01-21
Age : 66
Location : West Moors Dorset UK

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Wed 12 Jun 2013, 11:29 pm

Hi Andy,
I have sent you a PM. Thanks for your message. Every little helps as they say! Laughing
Cheers
Andy
P.S - Have you been through your PM messages and deleting some old ones?


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  andrew moody on Thu 13 Jun 2013, 12:40 am

35005CP wrote:Hi Andy,
I have sent you a PM. Thanks for your message. Every little helps as they say! Laughing
Cheers
Andy
P.S - Have you been through your PM messages and deleting some old ones?

Hi Andy.
Unable to reply on PM still getting blocked out but you have an email with (I hope) attachments.
Cheers
Andy


Andy Moody (AKA AJ52MDY on the UKTS site) West Moors, Dorset on the "Old Road" closed September 1964

andrew moody

Posts : 376
Join date : 2013-01-21
Age : 66
Location : West Moors Dorset UK

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Thu 13 Jun 2013, 5:07 pm

Hi Andy and everyone,
Firstly a great big Thankyou to Andy for the email and the photos. Will certainly be a great help, when I get round to finishing the DEMU off completely.
Also since yesterday I have been working on the Internal fixtures and fittings etc of the DEMU. Still some texture work to do, but have a look and see what you think? I'm really pleased with the results so far;



Cheers
Andy


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  rufuskins on Thu 13 Jun 2013, 6:39 pm

Andy
Continues to look good Very Happy

Alec


ALEC - Supporter of MSTS and TSSH!

rufuskins

Posts : 3350
Join date : 2013-01-17
Age : 68
Location : Milnrow, Lancashire

Back to top Go down

Re: Andy's Workshop

Post  mikehendle on Thu 13 Jun 2013, 7:14 pm

Hi Andy
They look first class to me and capture the narrowness of the Hastings units,for a first attempt you have done very well

Mike


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

Re: Andy's Workshop

Post  andrew moody on Fri 14 Jun 2013, 12:33 am

Hi Andy.
Still unable to PM but have sent email with Pics in full size format.
Like your revised interior as well.
Cheers
Andy


Andy Moody (AKA AJ52MDY on the UKTS site) West Moors, Dorset on the "Old Road" closed September 1964

andrew moody

Posts : 376
Join date : 2013-01-21
Age : 66
Location : West Moors Dorset UK

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Sat 15 Jun 2013, 12:00 am

Hi all,
Thankyou so much for all the replies and positive feedback. Learnt some new tricks today with thanks to Justin's help. I've done a bit more work on the Interior.
Thanks for the email Andy. Those new attachments are really going to help.
Here is another Internal shot! Not like Clapham Junction in the Rush Hour! But at least we are getting there with it! Smile



Cheers

Andy


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Mon 17 Jun 2013, 7:57 pm

Hi all,
1001 has been brought out temporarily from the Workshops on a small test run. Here she is early morning at Waterloo East Very Happy
It's been great to have a play with her. Now she must go back into the workshops for some serious painting and Texturing in some areas.... Got to get a few things working and some other bits right. Managed to resolve the Corridor connections (I think). Going to try and bring the Pipes up between the coaches so that they meet (helps with Braking amongst other things) ;-)



Cheers

Andy


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  dee4141 on Mon 17 Jun 2013, 10:28 pm

Well done Andy, that's a lovely job!Very Happy
avatar
dee4141

Posts : 289
Join date : 2013-01-20
Location : Scotland

Back to top Go down

Re: Andy's Workshop

Post  rufuskins on Tue 18 Jun 2013, 6:37 am

Continues to impress.


ALEC - Supporter of MSTS and TSSH!

rufuskins

Posts : 3350
Join date : 2013-01-17
Age : 68
Location : Milnrow, Lancashire

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Tue 25 Jun 2013, 12:03 am

She is continuing to get close... A shot today after some more work...



Really enjoying this and although I want this done, I want to make this as close to the real thing as possible. Ignore the bogies on the Blue & Grey set at the back of the shot, these haven't been done yet.
Got some work to do on the Internal for the Buffet, so if anyone has any photos please, would be really appreciated.
Thanks
Andy


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  mikehendle on Tue 25 Jun 2013, 9:44 am

Hi Andy,

They are looking good and can't wait to run them I think I will have to put LSE back onto my computer, unfortunately I cannot help with the buffet car,as my Southern Reference books don't include the MK1 coaches.

When I was into model railways I managed to get a book on MK1 coaches from the library,it had pictures and scale diagrams of them,it might be worth trying your local library.

Mike


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

Re: Andy's Workshop

Post  andrew moody on Tue 25 Jun 2013, 9:07 pm

Hi Andy.
Why dont you try contacting the Hastings Diesels ltd website?, there might be someone that has drawings.
Just type in Hastings Demu's.
Those photos that I sent you, one of them was of the interior of the buffet coach, it looked to me
that there was a sliding door that seperated the buffet bar which was at one end of the coach.

Sadly the buffets were withdrawn fairly early, the only two that survived were heavily modified,
one as a APT laboratory test coach, the other one became The Southern region General managers
saloon TDB 975025 now in general use answering to the name of Caroline.

Your units are looking very good.
Cheers (And hope this is of some help
Andy


Andy Moody (AKA AJ52MDY on the UKTS site) West Moors, Dorset on the "Old Road" closed September 1964

andrew moody

Posts : 376
Join date : 2013-01-21
Age : 66
Location : West Moors Dorset UK

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Tue 25 Jun 2013, 10:43 pm

Hi Mike & Andy,
Thanks for the replies Gents. Much appreciated. I have been unable to find anything on the Hastings DEMU Buffet car's layout.
Mike are you saying the layout is or should be exactly the same as a Mk1 Coach Buffet car layout? If it is, do you know where I can find a picture from the corridor end?
Andy, thanks, I did look at the picture you sent me but not sure if it is midway (the sliding door) between the "Passenger one stop café" to the serving desk (So to speak). Looking at the layout of the windows it looks vaguely like the sliding door is midway... 
I have emailed Hastings Diesels prior to writing this, so lets hope they can help me out? Or failing that it will have to use the Interior of a Mk1 Coach..... Perfection will then be ruined!! Shocked ha ha.... Smile
Thanks once again
Andy


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  rufuskins on Wed 26 Jun 2013, 7:07 am

I see that the excellent progress has been made, and like others look forward to their release.

Of course once the three TOPS classes are finalised then it must be remembered that the scope for additional consists is of great interest as can be seen in the list below:-



I look forward to seeing both the short framed 201(6S) and long framed 202(6L) and 203(6B) plus the variations that BR(SR) used during their lifetime.

Thanks


ALEC - Supporter of MSTS and TSSH!

rufuskins

Posts : 3350
Join date : 2013-01-17
Age : 68
Location : Milnrow, Lancashire

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Fri 28 Jun 2013, 2:05 pm

Hi all,
With Dave Robinson's (TwoManyDjs) Permission and with a break from modelling the DEMU and whilst I wait for Justin to come back to me on a couple of issues, I plan to get something uploaded to UKTs today. I have redone one of his Bulleid Pacific's as 34056 'Croydon'. Comes with a ready to run consist and has been checked and tested as well.
One of my favourite locos from the runs (Videos) and from the stories I have heard. A shame she wasn't preserved as by all accounts a fantastic engine to work on. So my piece for MSTS June... Very Happy 





Thanks

Andy

P.S - I have renamed the title of the thread.


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Thu 04 Jul 2013, 5:30 pm

Hi All,
After I created Rebuilt Bulleid 'Croydon' for MSTS for June. Mike asked if I wouldn't mind doing one of 34049 'Anti-Aircraft Command'. It has taken me a while to do as I have had to do the Oval from scratch, as well as moving along with the DEMU.
Here are some shots.







Cheers

Andy Very Happy 


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  mikehendle on Fri 05 Jul 2013, 12:11 am

Hello Andy,
Thank you for finding the time to make this model,it looks really fine,especially the crest.
Mike


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Fri 05 Jul 2013, 5:09 pm

Hi Mike and Everyone,
This has now been uploaded to UKTS and is just awaiting approval. (File ID 31402)
Here is a picture to wet the appetite in the interim;








Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  mikehendle on Fri 05 Jul 2013, 5:26 pm

Hi Andy,
That is a fine screen shot brigs back memories of school holidays in the 1950\60's,looks like it has just come off the Weymouth Portion of a Up train,and is going forward and then reverse through the station and going on shed.
I see the Trolley bus looks like one of the ex Brighton and Hove four wheelers,probably on route 26,wouldn't it be nice to have one of the Bournemouth Corporation Leyland PD 2, I can remember them on the no 2 Route.it would make a change from all the Bristols,that are available.

Mike


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Fri 05 Jul 2013, 9:57 pm

mikehendle wrote:Hi Andy,
That is a fine screen shot brigs back memories of school holidays in the 1950\60's,looks like it has just come off the Weymouth Portion of a Up train,and is going forward and then reverse through the station and going on shed.
I see the Trolley bus looks like one of the ex Brighton and Hove four wheelers,probably on route 26,wouldn't it be nice to have one of the Bournemouth Corporation Leyland PD 2, I can remember them on the no 2 Route.it would make a change from all the Bristols,that are available.

Mike

Hi Mike,
Thanks. I was quite 'Chuffed' with that screenshot too, hence posting it. It brought a sense of realism to the Sim. Being a Bulleid lover (can you tell from all my uploads) I have wanted to do what I can for so long. Hence rebadging Dave's Bulleids to 34056 'Croydon' and the Activities and with Clanlines Support Coach, I think you get the gist of my love of Southern Steam. My Father was a Nine Elms Engineman and then went to Victoria and then to Tonbridge before eventually retiring. I was a volunteer as a fireman on the Midhants Railway until I was made redundant from my job.
Without Justins help and advice and what I have learnt so far I would never have imagined doing something like this for the sim. Still have my biggest project yet to finish off in the form of a Hastings DEMU set, with a lot of scope (I believe) for other simmers to put whatever consist they want together.
Netherless, I'm really enjoying doing something different as I do learning all new things...
AAC 34049 has now been accepted and is ready to be downloaded.
Thanks
Andy


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  rufuskins on Sat 06 Jul 2013, 3:53 pm

More good work Andy, thanks.


ALEC - Supporter of MSTS and TSSH!

rufuskins

Posts : 3350
Join date : 2013-01-17
Age : 68
Location : Milnrow, Lancashire

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Mon 08 Jul 2013, 10:54 pm

After doing those 2 Bulleids, I thought it was best to get back to my Hastings DEMU set. Been going tooth and Nail today on some more texturing....
I have started work on the TFK and done the lettering and Numbering. Also added some headcode detail. The pictures should be pretty self explanatory...













Cheers

Andy Very Happy 


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Thu 18 Jul 2013, 9:51 pm

Hi all,
Getting ever closer to completing (I believe) my Hastings DEMU's, here is 1001 with a 12 coach formation beside 1003 at Tonbridge;

And here is a close up of the Buffet car;

And finally of the rear 6 coach formation of 1035. Sorry I haven't included the TFK in it this evening;


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  dee4141 on Fri 19 Jul 2013, 8:49 am

Very nice work Andy - especially for your first model!
avatar
dee4141

Posts : 289
Join date : 2013-01-20
Location : Scotland

Back to top Go down

Re: Andy's Workshop

Post  mikehendle on Fri 19 Jul 2013, 11:03 am

Hi Andy,
Fantastic models Andy no one would believe these were your first attempt at model making,I like the green Hastings Buffet Car.
Mike


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

Re: Andy's Workshop

Post  bharrison on Fri 19 Jul 2013, 11:00 pm


Andy,

excellent job on all your models including your DEMU. I couldn't do it. well done Very Happy 


Thank You Ben  A4PSmemberTSSH Footplate Crew
avatar
bharrison

Posts : 617
Join date : 2013-01-22
Location : Somewhere on the old LNER network North of york

Back to top Go down

Re: Andy's Workshop

Post  Markh5682 on Sat 20 Jul 2013, 3:02 am

Hi Andy.

Brilliant job you have done there, wish I could do it. OK 


Mark
avatar
Markh5682

Posts : 2544
Join date : 2013-01-21
Age : 62
Location : Lancashire

http://www.youtube.com/user/markh5682

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Sun 04 Aug 2013, 12:11 pm

Hi all,
Does anyone know where I can find shelves or Racking that I can use for textures for my DEMU Buffet car please?
Thanks in Advance
Andy


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Mon 05 Aug 2013, 4:54 pm

Hi all,
As per my last email. Here are a couple of shots showing the Buffet Car close to completion.





And a picture showing the true Internal view of the Buffet car;



As shown in the 3rd Picture, I am struggling to find a texture, I need a full frontal view of the shelves behind the serving hatch? I can't find any at all. Can anyone help me out at all please?
Thanks in advance


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  mikehendle on Mon 05 Aug 2013, 5:06 pm

Hi Andy,
The only people I can think of who maybe able to help are,Southern Email Group( www. semgonline.com),they deal with all things Southern,I'm afraid google search didn't bring up any interior shots of the buffet car.
Mike


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Mon 05 Aug 2013, 5:21 pm

Thanks Mike,
It doesn't have to be an image of a Hastings DEMU Buffet storage racks, it can be of a MK1 Buffet coach or something equivalent.
Thanks anyway.


Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  ianmacmillan on Mon 05 Aug 2013, 11:12 pm

I searched for a similar thing without success.

Best I could do is the bottles in my Light railway buffet.
Use them if you want.

You could also photo the sandwich self in the supermarket.

ianmacmillan

Posts : 170
Join date : 2013-01-18

Back to top Go down

Re: Andy's Workshop

Post  rufuskins on Tue 06 Aug 2013, 7:02 am

Andy
I'm impressed with the level of detail you are providing with this model. As a last resort you could of course use the picture that you have and measure the visible elements and knowing the dimensions that you have already used create a scaled version - might not be 100% but as we all know MSTS is built on compromise.


ALEC - Supporter of MSTS and TSSH!

rufuskins

Posts : 3350
Join date : 2013-01-17
Age : 68
Location : Milnrow, Lancashire

Back to top Go down

Re: Andy's Workshop

Post  35005CP on Wed 07 Aug 2013, 10:59 pm

Hi all,
Today I have made a texture file for the Buffet car ordering section; The standard items such as buns, Crisp, Drinks etc...

Buffet car view from the outside;



Buffet car view Inside; (for those wishing passenger view later on from the inside of the buffet car)



Andy - TSSH Footplate Crew
avatar
35005CP

Posts : 1617
Join date : 2013-01-23
Age : 38
Location : East Sussex

http://nineelms.freeforum.me.uk/

Back to top Go down

Re: Andy's Workshop

Post  mikehendle on Wed 07 Aug 2013, 11:38 pm

Hi Andy
The interior of the buffet car looks really good,you are certainly making a good job of the Hastings sets.
Mike


Mikeex Zuid Afrikaans Sporweg employee[i]
avatar
mikehendle

Posts : 625
Join date : 2013-01-17
Age : 69
Location : Peterborough UK

Back to top Go down

Re: Andy's Workshop

Post  Markh5682 on Thu 08 Aug 2013, 1:26 am

Looks really good Andy.

Are you going to set up a passenger view inside the buffet car? it would be a shame for you to do all that work and no one see it close up.

You could still set up passenger views for the other carriages as MSTSBin will allow you to choose which carriage to view the passview in.


Mark
avatar
Markh5682

Posts : 2544
Join date : 2013-01-21
Age : 62
Location : Lancashire

http://www.youtube.com/user/markh5682

Back to top Go down

Re: Andy's Workshop

Post  Sponsored content


Sponsored content


Back to top Go down

Page 2 of 10 Previous  1, 2, 3, 4, 5, 6, 7, 8, 9, 10  Next

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum